- Home /
- DC choke, 220 µH 0,5 A 2,6 Ohm, axial, 5 pieces
Suppression choke (up to VHF)
220 µH 0,5 A 2,6 Ohm
LBC (large bobbin core) choke
Single-layer winding on ferrite, taped.
Dimensions:
Length of the coill former: 23 mm
Length with connecting wires: 87 mm
Grid: min. 25 mm
Diameter: max. 7,5 mm
Application: It is also useable as a storage throttle up to ca. 100 kHz.
Further applications: It is possible to build a pulse transformer by applying a primary winding (4-12 turns of 0,4-1 mm copper wire). Then it is useable to produce a sparkling voltage for gas discharge lamps, for example.
Packing unit: 5 pieces
220 µH 0,5 A 2,6 Ohm
LBC (large bobbin core) choke
Single-layer winding on ferrite, taped.
Dimensions:
Length of the coill former: 23 mm
Length with connecting wires: 87 mm
Grid: min. 25 mm
Diameter: max. 7,5 mm
Application: It is also useable as a storage throttle up to ca. 100 kHz.
Further applications: It is possible to build a pulse transformer by applying a primary winding (4-12 turns of 0,4-1 mm copper wire). Then it is useable to produce a sparkling voltage for gas discharge lamps, for example.
Packing unit: 5 pieces
Category Navigation:
- Enamelled & Litz Copper Wires
- Bottles and Tins
- Chokes & transformer & filter
- Ferrite- & Iron powder Cores
- Boxes and mounting plates
- Insulating materials
- Soldering and Flux
- Magnets
- RFID Transponder coil
- Coil formers and equipment
- Pot core sensor coil
- Impregnating varnish