- Home /
- RM 5 Coil former for fine wire, 4 pins
RM 5 coil former
for fine wire
with tolerance compensation at the upper flange
and special winding terminals for strain relief of fine wires
Sections: 1
Pins: 4
The edge-gated clips hold the coil former in the core.
The wire is wound around the terminals. Then these are turned up, so that a small loop is formed and the wire is relieved from strain.
Packing unit: 1 piece
for fine wire
with tolerance compensation at the upper flange
and special winding terminals for strain relief of fine wires
Sections: 1
Pins: 4
The edge-gated clips hold the coil former in the core.
The wire is wound around the terminals. Then these are turned up, so that a small loop is formed and the wire is relieved from strain.
Packing unit: 1 piece
Category Navigation:
- Enamelled & Litz Copper Wires
- Bottles and Tins
- Chokes & transformer & filter
- Ferrite- & Iron powder Cores
- Boxes and mounting plates
- Insulating materials
- Soldering and Flux
- Magnets
- RFID Transponder coil
- Coil formers and equipment
- Pot core sensor coil
- Impregnating varnish