- Home /
- Enamelled copper wire 1,5 mm, non-solderable, TI 200 °C, 250 g
Enamelled copper wire AWG 15 / 1,5 mm
Grade 1 (W210 = thermal class K (200 °C), very high thermal and chemical stability, non-solderable)
"Non-solderable" means that you have to remove the isolation first before you can solder the wire.
Diameter (conductor): 1,5 mm
Cross section: 1,767 mm²
External diameter: from 1,538 mm to 1,57 mm
Breakdown voltage: 2700 V
DC resistance: 0,009757 ohm/meter
1 kg is 0,063 km.
Packaging: 250 g (ca. 0,016 km) on a K80-spool, non-returnable
Grade 1 (W210 = thermal class K (200 °C), very high thermal and chemical stability, non-solderable)
"Non-solderable" means that you have to remove the isolation first before you can solder the wire.
Diameter (conductor): 1,5 mm
Cross section: 1,767 mm²
External diameter: from 1,538 mm to 1,57 mm
Breakdown voltage: 2700 V
DC resistance: 0,009757 ohm/meter
1 kg is 0,063 km.
Packaging: 250 g (ca. 0,016 km) on a K80-spool, non-returnable
Category Navigation:
- Enamelled & Litz Copper Wires
- Bottles and Tins
- Chokes & transformer & filter
- Ferrite- & Iron powder Cores
- Boxes and mounting plates
- Insulating materials
- Soldering and Flux
- Magnets
- RFID Transponder coil
- Coil formers and equipment
- Pot core sensor coil
- Impregnating varnish