- Home /
- HF-Litz Wire 15 x 0,1 mm, 50 g-spool
High-frequency litz wire 15 x 0,1 mm, silk covered
Enamel of the single wires: V155 (= thermal class F (155 °C), good thermal stability, solderable)
External diameter: from 0,533 mm to 0,593 mm
Total conductor cross section: 0,12017 mm²
DC resistance: 0,148 ohm/meter
1 kg is 1,079 km.
Minimum packing unit: 50 g (ca. 0,054 km) on a choke coil former, type 4 (click here), non-returnable
Sale of small casks only available from stock.
If you order more than 50 g, the wire can be rewound on a single spool.
This has to be requested upon ordering.
Enamel of the single wires: V155 (= thermal class F (155 °C), good thermal stability, solderable)
External diameter: from 0,533 mm to 0,593 mm
Total conductor cross section: 0,12017 mm²
DC resistance: 0,148 ohm/meter
1 kg is 1,079 km.
Minimum packing unit: 50 g (ca. 0,054 km) on a choke coil former, type 4 (click here), non-returnable
Sale of small casks only available from stock.
If you order more than 50 g, the wire can be rewound on a single spool.
This has to be requested upon ordering.
Category Navigation:
- Enamelled & Litz Copper Wires
- Bottles and Tins
- Chokes & transformer & filter
- Ferrite- & Iron powder Cores
- Boxes and mounting plates
- Insulating materials
- Soldering and Flux
- Magnets
- RFID Transponder coil
- Coil formers and equipment
- Pot core sensor coil
- Impregnating varnish