High-frequency litz wire 120 x 0,1 mm, uncovered
Enamel of the single wires: V155 (= thermal class F (155 °C), good thermal stability, solderable)
External diameter: from 1,417 mm to 1,573 mm
Total conductor cross section: 0,96133 mm²
DC resistance: 0,0185 ohm/meter
Uncovered litz wire is better for wire guiding. Multiple windings without intermediate isolation are not recommended.
1 kg is 0,102 km.
Minimum packing unit: 50 g (ca. 0,005 km) on a choke coil former, type 4 (click here), non-returnable
Sale of small casks only available from stock.
If you order more than 50 g, the wire can be rewound on a single spool.
This has to be requested upon ordering.
Enamel of the single wires: V155 (= thermal class F (155 °C), good thermal stability, solderable)
External diameter: from 1,417 mm to 1,573 mm
Total conductor cross section: 0,96133 mm²
DC resistance: 0,0185 ohm/meter
Uncovered litz wire is better for wire guiding. Multiple windings without intermediate isolation are not recommended.
1 kg is 0,102 km.
Minimum packing unit: 50 g (ca. 0,005 km) on a choke coil former, type 4 (click here), non-returnable
Sale of small casks only available from stock.
If you order more than 50 g, the wire can be rewound on a single spool.
This has to be requested upon ordering.