- Home /
- EELP18 Core Set N87, ungapped, Al2600
EELP18 core set
Material: N87
AL value 2600, ungapped
Preferred frequency range: 500kHz
Application note: These cores enable the design of very flat transformers. If necessary openings for the legs of the ELP core can be set into the printed board to insert the core halves into it. The windings of the transformer serve as conducting paths in the layout of the printed board. Especially effective for multilayer boards.
consisting of:
2x ELP 18/4/10
EPCOS: B66283-G-X187
Type data sheet: CLICK here
Packing unit: 1 set (2 pieces)
Weight: 4,8g
Material: N87
AL value 2600, ungapped
Preferred frequency range: 500kHz
Application note: These cores enable the design of very flat transformers. If necessary openings for the legs of the ELP core can be set into the printed board to insert the core halves into it. The windings of the transformer serve as conducting paths in the layout of the printed board. Especially effective for multilayer boards.
consisting of:
2x ELP 18/4/10
EPCOS: B66283-G-X187
Type data sheet: CLICK here
Packing unit: 1 set (2 pieces)
Weight: 4,8g
Category Navigation:
- Enamelled & Litz Copper Wires
- Bottles and Tins
- Chokes & transformer & filter
- Ferrite- & Iron powder Cores
- Boxes and mounting plates
- Insulating materials
- Soldering and Flux
- Magnets
- RFID Transponder coil
- Coil formers and equipment
- Pot core sensor coil
- Impregnating varnish